Page 5 - Combined_3_OCR

- »?-■ . CN

Pluragard 601 is a 2-component system yielding a light-weight foam that
may be applied by most conventional spray equipment. The two components
are used in a 1:1 ratio and incorporate a continuous color indicator giving
a creamy raspberry-colored foam. This color, produced by a dye in the resin
component, helps the operator determine if the two components are properly
mixed. If the spray changes color or becomes streaked with ’’fingers" of color,
the components are not being properly metered. Both components are stable
and when stored properly have a demonstrated shelf life in excess of six
months.

Available in bulk and 55-gallon drums, this system can be easily employed
at job sites wherever temperature and climatic conditions permit. No
special environment other than temperature conditions (see application
instructions for detail) is required for application. Pluragard 601
spray-applied foam is priced at only a slight premium over other insulating
foams and meets the needs of the construction industry and others requiring
a highly effective, flame-resisting insulating material.

The successful use of this system depends upon careful adherence to the
application instructions which follow. FaZZuAC to ^ottou) theAe Stecommenda-
ttonA may siUuJtt tn cl ^oam which dock not meet the AtandatdA ttequt’ied ^ott
the UndeAWtitetb' LabosiatositeA stating.

These UL listing marks dre your assurance of a Fire Hazard Classification
Flame-Spread Rating of 25-or-less. Look for them...they1re on every drum
O i H the Pluragard 601 spray system.

PLURAGARD 601 - R RESIN COMPONENT PLURAGARD M 601 -T ISOCYANATE COMPONENT

FOAMED PLASTIC INGREDIENT FOAMED PLASTIC INGREDIENT
CONTENTS NOT OVER 55 GALLONS. ISSUE NO. 000000 CONTENTS NOT OVER 55 GALLONS. ISSUE NO. 000000
MIX WITH RESIN COMPOUND PLURAGARD 601-T IN AC­ MIX WITH RESIN COMPOUND PLURAGARD 601-R IN AC­
CORDANCE WITH MANUFACTURER'S RECOMMENDATIONS CORDANCE WITH MANUFACTURER'S RECOMMENDATIONS
TO PRODUCE FINISHED FOAMED PLASTIC. TO PRODUCE FINISHED FOAMED PLASTIC.
FIRE HAZARD CLASSIFICATION FIRE HAZARD CLASSIFICATION
(BASED ON 100 FOR UNTREATED RED OAK) (BASED ON 100 FOR UNTREATED RED OAK)

£
o o

SEE OUR CATALOG IN SWEET'S
INDUSTRIAL CONSTRUCTION AND
ARCHITECTURAL CATALOG FILE

Wyandotte Chemicals does not produce urethane foam or foam products commercially.
We do manufacture Pluracol® polyols, TDI and catalysts for all types of urethane
products, as well as froth, pour-in-place and spray-foam urethane systems.