Page 1 - Combined_148_OCR

FORGETIT! MANATROL'S PRESSURE / TEMPERATURE

COMPENSATED FLOW CONTROL VALVES

. . . THE EASIEST, MOST PRECISE WAY TO
■ .<•
ADJUST HYDRAULIC FEEDS AND SPEEDS

These new TPCCSL valves maintain a constant flow rate over

a pressure range of 100-3000 psi, regardless of changes in

load, fluid temperature or pressure.

Exclusive COLORFLOW adjustment scale and pressure-

balanced anti-backlash design provide the ultimate in precise

flow setting, adjustment and resetting. The operator simply

turns the rugged knurled knob to the desired flow rate and

locks it directly with a key. There are no secondary set screws

to tighten. The flow setting is tamperproof until the valve is

unlocked. Precise adjustment is provided by six complete turns

of the knob, as indicated by the colored numbers in the tri­
I
COLORFLOW angular window, and one hundred segments for each turn on

PRESSURE COMPENSATED the outer scale.

FLOW CONTROL & CHECK VALVE
TPCCSL valves are available in two sizes:
MODEL TPCCSL-6OO-
TPCCSL-600 for standard NFPA 2F02 mounting. Flow: 0-8 gpm

Five different needles are available: 0-25 CIPM,

50 CIPM, 140 CIPM, 3 GPM and 8 GPM
\ LOCK •ADJUST
TPCCSL-8OO for standard NFPA 2F03 mounting. Flow; 0-28 gpm

Carburetor intake headers.

ANATROL

201 PERRY COURT

B-3351-ML ELYRIA, OHIO 44035

Circle Service No. 21

Crankshaft follows 340-cu-in design, uses
tougher steel.

.■■k ew

Head is developed from standard 340-cu-in

cast-iron part; alternate aluminum head

still is under consideration. Valves are also

standard 340-cu-in items; exhaust valve
stems are sodium-filled for cooling.

(News continued on next page)

April 14, 1969 / 25