Page 2 - Combined_174_OCR
P. 2
TECHNICAL MEETINGS
AND CONFERENCES
Boston, Mass.
April 12-16
16th ANNUAL MEETING INSTITUTE OF EN
VIRONMENTAL SCIENCES (Boston Shera
ton). Theme: “The Environmental Chal
lenge of the 70’s”. Contact: Fred Herman,
Tenny Engrg. Co., Inc., Paramount, Calif.
Detroit, Mich.
April 13-17
SME INTERNATIONAL ENGINEERING CON
FERENCE (Cobo Hall). Contact: Informa
tion Services, Society of Manufacturing
Engineers, 20501 Ford Rd., Dearborn,
Mich. 48128.
Boston, Mass.
>
I
1 1 1 April 16-17
J FLUID LOGIC CONFERENCE (Boston Shera
ton). Contact: Fluid Power Society, Box
i
• ? 905, Elm Grove, Wis. 53122.
/ £
z / f
1 &
? $
/ ■ / &
Denver, Colo.
April 22-24
11th STRUCTURES, STRUCTURAL DYNAM
ICS AND MATERIALS CONFERENCE, ASME.
Contact co-sponsor: Meetings Manager,
American Institute of Aeronautics & As
tronautics, 1290 Sixth Ave., New York,
How much will
N.Y. 10019.
Houston, Tex.
your next idea SECOND OFFSHORE TECHNOLOGY CONFER
April 22-24
ENCE (Albert Thomas Convention Center).
Contact: Public Relations Dept., Offshore
cost? Technology Conference, 6200 N. Centra!
Expressway, Dallas, Tex. 75206.
New York, N.Y.
May 4-7
28th ANNUAL TECHNICAL CONFERENCE,
American Motors chose fiber glass rein
Say the next part you will produce process to give you the most eco forced plastics (RP) for the ducktail spoiler SPI (Americana Hotel). Contact: Roger P.
has a relatively small-quantity run. nomical results without sacrificing on the Mark Donahue special model of the Fox, Society of Plastics Engineers, 656 W.
And the costs of production using product quality. Javelin SST. At high speeds, spoiler creates Putnam Ave., Greenwich, Conn. 06830.
your present materials will be away If you need outside help, we can a down pressure on the rear of the car
recommend a fabricator or molder which improves car's stability and handling.
out of line. Cost of stamping spoiler out of sheet
So you turn to reinforced plastic whose facilities meet your needs. steel was too costly. RP spoilers molded Cleveland, Ohio
May 6-8
(RP) which can be molded by low- And our T&E lab can evaluate the by Eaton Model & Pattern Co., Millikon, 21st ANNUAL NATIONAL CONFERENCE, AIIE
cost processes and can, at the same results of your process. Michigan, cut costs, weigh less, have (Sheraton-Cleveland Hotel). Contact:
time, offer great design flexibility. Let us send you a copy of "Rein almost the same strength as steel, have Technical Services Director, American
But finding the right resin and the forcements by Design." Anything smooth finish, are corrosion resistant, and Institute of Industrial Engineers, 345 E.
are painted to match the car.
right process could be a problem. else we can help you with ? Ask us. 47th St., New York, N.Y. 10017.
This is where PPG can help. Because We'll go to work on it.
PPG has a line of fiber glass rein Write PPG Industries, Fiber Glass
forcements that will go with just Division, Room 703-K, One Gate Chicago, III.
about any product you want to make. way Center, Pittsburgh, Pa. 15222. May 11-14
1970 DESIGN ENGINEERING SHOW (Inter
In addition, we can help you pick In Europe: N.V. Silenka AKU- Fiber Glass national Amphitheatre). Contact: Clapp
the right reinforcement and the right Pittsburgh, Hoogezand, Holland. & Poliak, Inc., 245 Park Ave., New York,
PPG is Chemicals, Minerals, Fiber Glass, Paints and Glass. So far. INDUSTRIES N.Y. 10017.
I DESIGN NEWS
